HIGH TORQUE TYPE RATCHET WRENCH

HIGH TORQUE TYPE RATCHET WRENCH

  • The socket part is thick and allows for strong tightening.

21mm socket on both sizes,  can be used front and back and forward and reverse

  • 21mm socket on both sizes,  can be used front and back and forward and reverse.
  • Not only the body, also the claw is forged. Excellent strength.
  • Filled with hole on the head part during processing, it maintains smooth ratchet drive.
  • The φ4.5mm hole for safety code.
  • The surface has a rust-resistant cation finish.

Material：Cr-V

Item No. JAN Code List Price
（¥）		 Use Range
（mm）		 Length

L
（mm）

 Weight
（ｇ）		 Inner Box
RM-21×21H 381798 9,700 21 358 800 2
Item No. Head Outside Diameter
（mm）		 Socket Outside Diameter

d
（mm）

 Head Thickness
（mm）		 Socket Length

ℓ
（mm）

 Guaranteed Torque
N・m
D Small Large T Small Large Small Large
RM-21×21H 52.0 32.5 32.5 20.0 10.0 10.0 573.7 573.7
*JAN Codes are shown by 6 digits numbers which removed as maker code (4975180).
*The price is for each unit.

HIGH TORQUE TYPE RATCHET WRENCHDrawings

  • 12 points (round corners)

    12 points (round corners)12 points (round corners) sockets are easier to insert nut. This surface fit design prevents damaging of bolts or nuts.

Use

  • Suitable for bolt and nut fastening work that requires strong tightening.
  • Suitable for removing rusty form tie nut as well.

Caution

  •  The large nominal size size is suoer ling socket type.
  • Chose proper size which suits to the size of bolt and nut.
  • DO NOT extend the handle by inserting a pipe.
  • Please DO NOT use this item as a hammer.
  • Connect to safety code for fall prevention to use at height.
  • DO NOT use for purposes other than as hand tool.

SHARE

PAGE TOP