SPUD HANDLE BOX-END WRENCH

SPUD HANDLE BOX-END WRENCH(With podger)

●Excellent resistance. strength to final tighten.

●Closed wrench-60° Model with podger.

●Rings for safety code.

●26・27・30・32・35・36㎜ are with measure scales.

Item No. JAN code List price(¥) Nominal Dimensions(㎜) Length(㎜) Weight(g) Inner Box(Unit)
SM-17 690272 1,950 17 314 200 12
SM-19 690357 2,200 19 337 265 12
SM-21 690432 2,300 21 353 315 12
SM-22 690517 2,500 22 353 345 12
SM-24 690609 2,800 24 375 420 6
SM-26 690784 3,250 26 392 495 6
SM-27 690869 3,250 27 392 520 6
SM-30 690944 3,650 30 416 710 6
SM-32 691088 3,750 32 428 775 6
SM-35 691163 5,000 35 468 1,060 6
SM-36 691248 5,750 36 468 1,060 6
SM-41 691323 6,650 41 504 1,380 6
SM-46 691408 9,950 46 545 1,790 6
SM-50 691590 11,700 50 583 2,120 6
Item No. Head diameter(㎜) Head thickness(㎜) Jaw thickess(mm) Handle Thickness(mm) Podger thickness(mm) Torque
(N・m)
Package
(mm)
Material
H×W
SM-17 25.5 10.0 17.0 7.0 13.2 268 Cr-V
SM-19 30.0 11.5 19.0 7.5 14.2 330 Cr-V
SM-21 31.5 12.0 21.3 8.5 16.5 402 Cr-V
SM-22 33.0 12.5 21.3 8.5 16.5 443 Cr-V
SM-24 36.5 13.0 22.9 9.0 18.0 494 Cr-V
SM-26 40.0 14.0 25.3 9.5 20.3 608 Cr-V
SM-27 40.0 14.0 25.3 9.5 20.3 618 Cr-V
SM-30 45.5 14.5 27.5 10.0 23.0 779 Cr-V
SM-32 46.5 15.5 27.5 10.5 23.2 890 Cr-V
SM-35 55.0 17.0 32.3 11.0 27.2 1,030 Cr-V
SM-36 55.0 17.0 32.3 11.0 27.2 1,098 Cr-V
SM-41 61.0 19.0 36.5 12.0 29.0 1,118 Cr-V
SM-46 71.5 20.0 41.5 12.0 32.0 1,255 Cr-V
SM-50 76.0 22.0 43.5 13.0 34.0 1,324 Cr-V
※JAN codes are shown with 6 digital numbers removed maker code(4975180).
※The list price is for each unit.

Item No. SM-17 SM-19 SM-21 SM-22 SM-24 SM-26 SM-27 SM-30 SM-32 SM-35 SM-36 SM-41 SM-46 SM-50

SPUD HANDLE BOX-END WRENCHDrawings

  • 12 points (round corners)

    12 points (round corners)12 points (round corners) sockets are easier to insert nut. This surface fit design prevents damaging of bolts or nuts.

Use

  • For working on  heavy duty.

Caution

  • Adjust jaw to two-sided withs of bolt/nut.
  • Hold bolt/nut properly. not shallowly nor diagnally.
  • Do not insert pipe as extension.
  • Do not use as a hammer.
  • Do not use as any other purposes than as hand tool.

SHARE

PAGE TOP